Zagi HP w/Brushless 3100 kv Inrunner Motor

Starting at: $139.88

 

Zagi HP (48" wingspan) with a 3100kv brushless inrunner motor The new Zagi-HP (hardpoint) is a new more versatile flying wing from Trick Wings. The new motor tray employs a built in hardpoint mounting system.  The new system integrates a laser cut 1/8" plywood motor mount laminated inside in the styrene motor tray. The universal HP mount has three different pre-drilled holes in patterns for most brushless motors including the brushed Zagi Pusher motor. This mount system provides the ridged platform brushless power requires.  The HP mount insures no deformation of the form as it distributes the thrust and torque load over a wide area of the foam wing. The 3100 kv 28 x 36 brushless inrunner was designed and custom crafted for maximum performance for the Zagi. An 11.1  LiPo battery will turn the 5X5 prop at 22,000 rpm at only of 30 amps in static testing. Unloaded in flight, the rpm is 20% higher and the current is 20% lower. That means longer flights with light-weight 2200 mAh batteries and a smaller 30 amp ESC. Higher 3600 to 4000 kv motors were tested and were found power hungry. They produced more heat than power. The amps measured from 40 to 65 amps but the rpm remained almost the same. Specifications:     All EPP Foam       3100kv Brushless motor       Precision wire cut Airfoil:   Zagi 101.4 Light plywood brace Flying Weight:   24.5 to 26oz Five carbon spar matrix Wing Area:   475 sq in Transverse battery position Wing Loading:   7.9 oz sq ft Carbon prop w/aluminum adapter Speed:    85 mph Brushless Airfoil shaped, constant cord elevons

 

The new HP Motor Tray will convert the Zagi-XS to brushless

 

• Model: ZS403
• Shipping Weight: 4lbs

Product 2/9